 |
| Class 1 Div 2 |
| LED SafeSite White Down Light Class 1, Div 2 - New Product |
 |
| Introducing the new state-of-the-art fixture for hazardous location lighting. Its rugged, solid-state design creates a new era where failed lamps and expensive relamping costs become a thing of the past. This light incorporates both cutting edge LED ...[read more] |
 SafeSite_w.pdf
|
| Elevated Heliport Perimeter Edge Fixture (FAA Type L810) CLASS1, DIV2 |
 |
| The Visual Signal Light is an LED based Class 1, Division 2 certified fixture. Used for visual indication in hazardous environments, and to define the perimeter of the area required for helicopter landing and takeoff....[read more] |
HeliportC1D2_w.pdf
|
| Hazardous Location Flashing Visual Signals - New Product |
 |
| The Visual Signal Light is an LED Based Class I, Division 2 certified fixture. It is used for visual indication in hazardous environments, providing a valuable solution to the petrochemical industry facilities....[read more] |
Visual FLS_C1D2_w.pdf
|
| LED BEACON (FAA Type L864) CLASS 1, DIV 2 |
 |
| The D164 Series LED Based Class 1, Div 2 certified medium intensity red beacon was designed to easily
interface into existing systems or to be provided as a red lighting fixture for new installations. The beacon is used
to mark any obstacle that ma...[read more] |
LED_C1D2 Beacon_w.pdf
|
| LED OBSTRUCTION LIGHT (FAA Type L810) CLASS 1, DIV 2 |
 |
| The L-810 Obstruction Light is an LED BASED Class 1, Division 2 certified fixture. Used for obstruction marking of structures in hazardous environments, providing a valuable solution to the petrochemical industry
facilities.
1-800-739-9169 ...[read more] |
860_Series_c1d2_w.pdf
|
| LED Visual Signal Light (FAA Type L810) CLASS 1, DIV 2 |
|
| The Visual Signal Light is an LED based Class 1, Division 2 certified fixture. Used for visual indication in hazardous environments, providing a valuable solution to the petrochemical industry facilities....[read more] |
Visual Signal_C1D2_w.pdf
|
| LED Products |
| Dual Red/White Medium Intensity LED Beacon |
 |
| The dual beacon is the first production medium intensity Red/White beacon, utilizing state of the art optics. With the use of a simple controller, the beacon will provide over 20,000 cd in the daytime mode and 2,000 red in the nighttime mode. In the ...[read more] |
LED Dual_3layer_ System_a.pdf
|
| D264 Series Retrofit Adapter |
 |
| The D264 Series retrofit adapter allows for simple retrofit of a new LED Beacon to an existing incandescent base eliminating the need to fully dismantle the old fixture. By simply removing the top half of the existing incandescent light, the retrofit...[read more] |
Retrofit_Adapter_264Retro_01_unimar.pdf
|
| Dual Red/White Medium Intensity LED Beacon (European) |
 |
| The Dual Beacon is the first production medium intensity Red/White beacon, utilizing state of the art optics. With the use of a simple controller, the beacon will provide over 20,000 cd white for daytime use and has the following three night modes: 2...[read more] |
LED_Dual Beacon_ICAO_w.pdf
|
| LED D464 Flashing Red Beacon (FAA Type L864) |
 |
| The D464 Series LED based medium intensity red beacon was designed to easily interface into existing systems or to be provided as a red lighting fixture for new installations. Its robust, low power design will provide years of maintenance-free servic...[read more] |
LED_D264 Beacon_w.pdf
|
| LED GPS Beacon - New Product |
 |
| The Unimar GPS controlled beacons, P/N D264-A13-001-SP1 and P/N D264-A13-001-SP2 provide synchronized flashing of multiple units in wind farms and other applications. The Unimar GPS controlled beacons, P/N D264-A13-001-SP3 and P/N D264-A13-001-SP4 no...[read more] |
BCN-GPS_w.pdf
|
| LED Medium Intensity Dual Lighting System - New Product |
 |
| The Unimar LED based Medium Intensity Dual Lighting System is designed to provide aviation obstruction lighting for structures up to 500’ in height. This complete LED system exceeds FAA specifications.
Use of the UNI-E system provides 24 hours of av...[read more] |
LED Dual_3layer_ System_a.pdf
|
| LED Obstruction Lights (FAA Type L810) |
 |
| The 860 Series Red LED Obstruction Light is the first ETL certified LED based FAA type L-810 obstruction light. Designed for steady burning, this fixture is used to mark any obstacle that may present hazards to aircraft navigation.
1-800-739-9169 ...[read more] |
860_Series_w.pdf
|
| LED Visual Signal Light (FAA Type L810) |
 |
| The 860 Series Multi-Purpose LED Light fulfills the needs of engineers and architects requiring a rugged, weather-proof fixture in color alternatives to the standard red obstruction lights. Available in green, yellow, blue and white, these fixtures a...[read more] |
Visual Signal_w.pdf
|
| LEDPak |
 |
| IP66 rated and ETL listed to UL1598, this extremely efficient LED Fixture is designed to replace 2' or 4' Fluorescent Fixtures in Industrial, Commercial and Roadway applications. Extremely rugged and durable construction, and maintenance free....[read more] |
LEDPak_w.pdf
|
| RTO Series LED Obstruction Light - New Product |
 |
| The RTO Series obstruction light utilizes a unique optical, electrical and mechanical design. The RTO series is the most universal, compact and efficient obstruction light in the world. ETL certified to the FAA requirements, the RTO series fixture i...[read more] |
LED_RTO_w.pdf
|
| Assemblies and Components |
| Alarm Relay Assembly (OLR) |
 |
| The OLR Series Assemblies are field programmable by means of dip switches supporting up to 2 beacons or 4 single sidelights. Packaged in a 4” x 4” gasketed cast aluminum box, it installs directly into the conduit run.
A fault is detected with loss ...[read more] |
OLR.pdf
|
| Alternating Light Control with Transfer Relay (ALTR) |
 |
| The ALTR alternates between each light in a double obstruction light assembly each time the tower lights are energized by the photo control, ensuring equal usage of the lights over the life of the lamps. In the event one of the lights fails, the ALTR...[read more] |
ALTR.pdf
|
| Delayed Response Thermal Series Photo Control |
 |
| The Delayed Response Thermal Series Photo Control is a locking-type photo control. It has a built-in time delay which prevents false cycling caused by lightning flashes or stray headlights. This unit conforms to FAA requirements for airway obstructio...[read more] |
PEC.pdf
|
| Flasher Assembly (BFA) |
|
| Unimar offers 1, 2, and 3 Circuit Beacon Flasher Assemblies (BFA) to provide the proper sequence of ON and OFF time for the 300mm Beacons (FCB) to meet the FAA and FCC specifications. They feature totally solid state components encapsulated in a rugg...[read more] |
BFA.pdf
|
| PCR Series Photo Control |
 |
| The PCR Series Photo Control is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. The PCR was designed and built to meet the demands of the most rigorous requirement of tower and obstruction...[read more] |
PCR.pdf
|
| Photo Control Flasher Assembly |
 |
| This PCF assembly combines the function of the photo control switch with a flasher in a single package. The flasher output supports a single beacon. The second output circuit supports up to a 10 amp non-flashing load. The PCF is designed in a 4”x 4” ...[read more] |
PCF.pdf
|
| Photo Control Transfer Relay |
|
| The Photo Control with Transfer Relay (PCTR) provides the ON/OFF control and primary with backup function for a double obstruction light in a single, easy to install assembly.
The PCTR is a simple and easily installable solution for an application...[read more] |
PCTR.pdf
|
| The FB Series Alarm Relay |
 |
| The FB Series Alarm Relay is designed to provide the most complete Beacon/Flasher coverage to the latest FCC & FAA regulation. These modules will support one (two-lamp) beacon and associated flasher assembly. The 3001-009 monitors one LED flashing re...[read more] |
Alarm relays.pdf
|
| Totally Solid State Tower Flashers |
 |
| Totally Solid State Tower Flashers have proven their reliability through years of use on Communication Towers, Smoke Stacks, Cooling Towers, Tall Buildings, Bridges and Utility Towers. The highest quality components are fully encapsulated in a rugged...[read more] |
Flashers.pdf
|
| Transfer Relay Assembly (OTR) |
|
| The OTR assembly is a simple and easily installed method to activate a spare obstruction light in case of a failure of the primary obstruction light. It features totally solid state components encapsulated in a rugged plastic housing to protect again...[read more] |
OTR.pdf
|
| Universal Alarm Relay |
 |
| The UAR is truly a Universal Alarm Relay. Six onboard switches allow operator programming for the desired application; select from 1-4 lamps, beacons or sidelights. The 3001-003 has four onboard switches to allow programming of 2 to 9 lamps on a sing...[read more] |
Alarm relays.pdf
|
| Universal Lamp Alarm Relay (LED Beacons) |
 |
| The FB series is a Universal Lamp Alarm Relay designed to sense the failure of flashing LED beacons lamps. It will monitor the operation of one to eight beacons connected to a single flasher and/or auxiliary modules and the operation of the flasher. ...[read more] |
LED relay.pdf
|
| Obstruction Lighting Controllers |
| GPS Synchronized Flasher Controller |
 |
| The Unimar Synchronized Flasher Controller consists of solid-state components encapsulated in a rugged plastic housing to protect against shock, vibration and humidity. This rugged assembly is then packaged into a NEMA 4X Enclosure. It provides synch...[read more] |
SFC.pdf
|
| Custom Obstruction Lighting Controllers |
 |
| Unimar’s custom lighting controllers are designed and manufactured to meet your specific needs. Working directly with Unimar’s experienced design engineering staff, we will provide you with the perfect system for your application at the very best val...[read more] |
Controller Features.pdf
|
| Standard Red Light Controllers |
 |
| Unimar’s standard lighting controllers are designed to support the most common obstruction lighting configurations required by the FAA. They are manufactured with all of the following standard features (on right):
1-800-739-9169 ...[read more] |
Controller Features.pdf
|
| Accessories |
| ABB Disconnects |
 |
| SafeLine enclosed disconnects are designed to meet customer requirements in terms of safety, ease of installation and operational convenience. They are available in a wide range of amperage ratings, pole selection (2,3 and 4 pole), lockable handles a...[read more] |
| |
| Boost Transformer Assembly |
 |
| FAA and FCC require the lamp voltage be maintained within 3% of the rated lamp voltage. A voltage drop occurs in the conductor between the controller and the light fixture based on length and size of the conductors. Larger conductors can be used to m...[read more] |
| |
| Lighting Alarm Monitor DM-32 |
 |
| The DM-32 Alarm Monitor is a highly sophisticated stand alone product that delivers quality monitoring at a reasonable price. Using any standard POTS line, this product can deliver alarms directly to an alphanumeric pager or a PC located at a Network...[read more] |
DM-32monitoring_w.pdf
|
| Lighting Alarm Monitor DM-900 |
 |
| The DM-900 Alarm Monitor is a highly sophisticated stand alone product that delivers quality monitoring at a reasonable price. The DM-900 has eight inputs that can be configured for contact closure or voltage alarms. These inputs can be configured as...[read more] |
DM-900monitoring_w.pdf
|
| Self-Leveling Device |
 |
| Lights mounted on non-permanent structures such as cranes or booms may change position. This device keeps lights level and properly focused to FAA specifications. At the same time, this reduces complaints from the local population....[read more] |
| |
| Solar Power Systems |
 |
| Solar panels and power systems sized for your specific application. Battery capacity is sufficient to operate for a minimum of five days without charging. Enclosures are NEMA 3R, cross ventilated and heavy gauge aluminum. Available with powder coatin...[read more] |
| |
| Tower Junction Box |
 |
| Heavy-duty construction. Made of cast aluminum with stainless steel hardware. Gasketed cover secured by a safety chain. (Custom drill and tap.)...[read more] |
| |
|
|
 |
|
|
 |
|
|
| > |
Adobe Acrobat is required in order to view PDF documents |
|
|
|
